HP Dell Acer Toshiba IBM Sony Laptop Copper Shim GPU Thermal Pad Universal Kit

Description

Universal Laptop Copper Shim kit
Thermal paste is not included and is required to install the shim kit.  You will need to have your own thermal paste.
Have you lost the gpu thermal pad on your heatsink or is it too damaged to use again?
Use this kit to replace it and lower your gpu temps 15%+ keeping your gpu from failure commonly caused by the poor quality stock thermal pads
How it works- (All three options are included with each order)
Option 1: copper shim(s) only - lowest temps
A variety of shim sizes/thicknesses that match the most common gpu gap (thicknesses between the gpu and heatsink) are included.
Most heatsinks will have an exact fit with these thicknesses, if not add another .008" or .01" shim to find an exact fit.
Simply slide the shims from thinnest to thickest between the heatsink and gpu until you find a correct fit, or mix and match them by stacking them on each other with thermal paste.
Option 2: copper shim/thermal putty - only 1-4c degree difference in max temp compared to option 1
Using this high quality thermal putty along with a copper shim shown in the pictures below cools both the gpu's die and surrounding area on the gpu for maximum cooling
Option 3: thermal pad only - 3-7c degree difference in max temp compared to option 1
The thermal putty pad is very high quality fujipoly brand which is one of the top manufacturers of computer component cooling solutions
--Includes--
7 shim variety - 1pc
.75"x.75"x
.008", 2pc
.75"x.75"x
.01", 1pc
.75"x.75"x
.022", 1pc
.75"x.75"x
.027", 1pc .75"x.75"x.044", 1pc .5"x.5"x.044"
Thermal putty pad -
14mmx10mmx1mm
Materials to lap/polish your gpu and heatsink